- Home
- Hardware & Tubing

Hardware & Tubing
Kitchen Faucet Adapter

Kitchen Faucet Adapter
$4.49
Specifications Fits most kitchen and bathroom faucets Chrome plated brass. Dual threads 15/16"-27 male and 55/64"-27 female to 3/4" MGH Comes with gasket(may be black or white) Kitchen Faucet Adapter Description This threaded faucet adapter allows you to attach the garden hose connector of your wort chiller directly to the kitchen sink for q...

Coupling Washer (Hex Nut Washer) Neoprene
$0.49
Features Neoprene washer provides leak-free seal Diameter: 13/16" Thickness: 1/8" Description Neoprene coupling washer used in the connection of beer lines. This is the U.S. Beer Industry Standard Washer. Use with coupling hex nut or wing nut (see related products).
Camlock Type F - 1/2"

Camlock Type F - 1/2"
$4.49
Features 304 Stainless Steel Description 1/2" Male Pipe Thread to Male Quick Disconnect Camlock Fitting (Also known as Snaplock or Cam and Groove Fittings)
Coupling Hex Nut, Beer

Coupling Hex Nut, Beer
$1.29
Chrome Plated Brass Coupling Hex Nut. US Beer Industry Standard Thread 7/8"-14 (5/8" BSP)
Camlock Type A - 1/2"

Camlock Type A - 1/2"
$4.69
Features 304 Stainless Steel Description 1/2" Female Pipe Thread to Male Quick Disconnect Camlock Fitting (Also known as Snaplock or Cam and Groove Fittings)
Camlock Type C - 1/2"

Camlock Type C - 1/2"
$6.49
Features 304 Stainless Steel Description 1/2" OD Hose Barb to Female Quick Disconnect Camlock Fitting (Also known as Snaplock or Cam and Groove Fittings)
MFL Barb 1/4"

MFL Barb 1/4"
$2.99
Features Stainless steel construction 1/4" flare thread 1/4" hose barb Fits on MFL connections MFL Barb 1/4" These barbs have a female flared swivel nut that attaches to MFL keg disconnects. The barbs come in two sizes, this is a 1/4" barb. Please select the proper size to match your hoses (1/4" barb will work with 3/16" or 1/4" beverage or ga...

Stainless Nipple / Extension Coupling - 1/2" NPT
$3.99
Stainless Nipple Extension 1/2" NPT . A specialty fitting used to extend the length of a nipple. One side is female the other side is male.

Street Elbow 1/2" NPT - Stainless
$4.49
Features 304 Stainless Steel DescriptionStreet Elbow fitting 1/2" Female NPT to 1/2" Male NPT

Ball Lock Style Quick Disconnect - Male QD x ½” Male NPT
$4.19
Male Quick Disconnect - 1/2" Male MNPT Features 304 Stainless Steel
Camlock BIG C - 1/2"

Camlock BIG C - 1/2"
$7.99
Features 304 Stainless Steel Description 1/2" ID Hose Barb to Female Quick Disconnect Camlock Fitting (Also know as Snaplock or Cam and Groove Fittings) This fitting features a large diameter inside the barb compared to the standard type C. The inside is a full 1/2" for no reduction of flow. Important to use on the inlet side of a chugger pump....

Ball Lock Style Quick Disconnect - Female QD x ½” Barb
$7.29
Female QD x 1/2" Barb Features 304 Stainless Steel
Coupling Wing Nut, Beer

Coupling Wing Nut, Beer
$2.99
Chrome Plated Brass Coupling Wing Nut allows for fast, convenient installation and removal without the need for tools. US Beer Industry Standard Thread 7/8"-14 (5/8" BSP).
Camlock Type B - 1/2"

Camlock Type B - 1/2"
$6.79
Features 304 Stainless Steel Description 1/2" Male Pipe Thread to Female Quick Disconnect Camlock Fitting (Also know as Snaplock or Cam and Groove Fittings)

Tee Fitting 1/2" Female NPT - Stainless
$4.29
T fitting 1/2" Female NPT. Made of Stainless Steel.

Ball Lock Style Quick Disconnect - Male QD x ½” Female NPT
$4.99
Male Quick Disconnect - Male QD x 1/2" Female NPT Features 304 Stainless Steel

Flat Silicone Washer (Fits over 1/2" MPT Nipple)
$1.99
Washer used on a 1/2 nipple for use with weldless fittings. Approx 13/16" hole fits over 1/2" MPT threaded stainless nipples and creates a tight seal. Larger sealing area than the standard silicone o-ring. Made of heat resistant (500 degree max temp) Food Grade Silicone.

Camlock Silicone Replacement Gasket - 1/2"
$0.49
Features Food Grade Silicone DescriptionCamlock Silicone Replacement Gasket - fits 1/2" Camlock Fittings (Also known as Snaplock or Cam and Groove Fittings)

Inline Diffusion Stone with 1/4" Hose Barb x 1/2"NPT -2 Micron Stainless
$13.99
Diffusion / Carbonating Stone with 1/4" Hose Barb - 2 Micron. Made of Stainless Steel. Use with an oxygen tank to aerate your wort or with CO2 to carbonate your beer faster. Has 1/2" pipe threads to screw into a Brite Tank fitting for carbonation or for an inline oxygenation system.

Silicone O-ring (Fits over 1/2" MPT Nipple)
$0.69
This is the standard silicone O-ring used on a 1/2 nipple for use with weldless fittings. 3/4" hole fits tightly over 1/2" MPT threaded stainless nipples and creates a tight seal. Made of heat resistant (500 degree max temp) Food Grade Silicone. 3/4" ID x 1" OD (1/8" thick)
Shank Washer, Metal

Shank Washer, Metal
$1.49
Features Inside Diameter: 7/8" DescriptionUse this metal shank washer along with a Jockey Box Shank Sealing Washer to reinforce and seal the hole around a cooler wall shank installation.

Nylon Flare Washer - 1/4"
$0.39
Features 1/4" flare connection Made of nylon Translucent color (white) DescriptionUse a flare washer in your flare fitting assemblies to ensure a leak free seal. Used for both gas and liquid connections.
Camlock Type E - 1/2"

Camlock Type E - 1/2"
$3.99
Features 304 Stainless Steel Description1/2" OD Hose Barb to Male Quick Disconnect Camlock Fitting (Also known as Snaplock or Cam and Groove Fittings)

Ball Lock Style Quick Disconnect - Female QD x ½” Female NPT
$6.99
Female QD x ½” Female NPT Features 304 Stainless Steel

Street Elbow High Flow Hose Barb 1/2" NPT - Stainless
$4.99
Features 304 Stainless Steel DescriptionStreet Elbow fitting 1/2" female NPT to 1/2" ID barb. This special High Flow Barb is commonly connected to threaded Camlock B fittings where a tight turn would kink your silicone tubing. The inside is a full 1/2" for no reduction of flow. Important to use on the inlet side of a Chugger Pump. Standar...

Duplex Cleaning Coupler for Cleaning Commercial Beer Lines
$7.99
This fitting allows you to connect two lines in order to clean commercial keg lines. Made of Stainless Steel.
Camlock Type D - 1/2"

Camlock Type D - 1/2"
$7.49
Features 304 Stainless Steel Description 1/2" Female Pipe Thread to Female Quick Disconnect Camlock Fitting (Also known as Snaplock or Cam and Groove Fittings)

Thick Silicone O-ring (Fits over 1/2" MPT Nipple)
$0.75
This is a thicker version silicone O-ring used on a 1/2 nipple for use with weldless fittings. 13/16" hole fits tightly over 1/2" MPT threaded stainless nipples and creates a tight seal. Made of heat resistant (500 degree max temp) Food Grade Silicone. 13/16" ID X 1-3/16" OD (3/16" Thick).

Plug Fitting- 1/2" Male NPT - Stainless
$2.99
1/2" Stainless Steel Plug, Use to plug off a Tee fitting or a valve . Made of Stainless Steel.

Elbow 1/2" Female NPT - Stainless
$3.99
Elbow fitting 1/2" female NPT . Made of Stainless Steel.

Camlock Custom Type A - 1/2" x 3/4"
$4.99
Features 304 Stainless Steel Description3/4" Female Pipe Thread to 1/2" Male Quick Disconnect Camlock Fitting (Also known as Snaplock or Cam and Groove Fittings). This is a special custom made Camlock. It features 3/4" Female Pipe Thread to screw onto the front of a Center Inlet Chugger Pump and works with all the other 1/2" standard Caml...

Nylon Flare Washer - 3/8"
$0.39
Features 3/8" flare connection Made of nylon Black DescriptionUse a flare washer in your flare fitting assemblies to ensure a leak free seal. Used for both gas and liquid connections.

Faucet to Garden Hose Adapter
$4.99
Features Attaches to faucet to adapt for a garden hose fitting Chrome finish Easy installation Meets California's AB1953 and Vermont's 18 VSA low lead laws DescriptionThis faucet to garden hose adapter converts a male (15/16" x 27 thread) or female (55/64" x 27 thread) to 3/4" male hose thread.

Ball Lock Style Quick Disconnect - Female QD x ½” Male NPT
$7.49
Female QD x 1/2" Male NPT Features 304 Stainless Steel

Diffusion / Aeration/ Carbonating Stone 1/4" Flare Thread - .5 Micron Stainless
$12.99
Diffusion / Carbonating Stone with 1/4" Flare Thread - 1/2 Micron. Made of 316 Stainless Steel. Use with an oxygen tank to aerate your wort or with co2 to carbonate your beer faster. Don't forget to get a flare barb and flare washer to connect the stone to your tubing.

Cross Fitting 1/2" Female NPT - Stainless
$5.99
Cross fitting 1/2" female NPT . Made of Stainless Steel.
Camlock Type F - 3/4"

Camlock Type F - 3/4"
$3.99
Features 304 Stainless Steel Description 3/4" Male Pipe Thread to Male Quick Disconnect Camlock Fitting (Also know as Snaplock or Cam and Groove Fittings)
Camlock Type B - 3/4"

Camlock Type B - 3/4"
$4.99
Features 304 Stainless Steel Description 3/4" Male Pipe Thread to Female Quick Disconnect Camlock Fitting (Also know as Snaplock or Cam and Groove Fittings)

Inline Diffusion Stone with 3/8" Hose Barb x 1/2"NPT -2 Micron Stainless
$34.99
This Inline Tee has 1/2" hose barbs on 2 sides and the oxygenation stone with 3/8" Hose Barb on the other side of the Tee. Either pump or gravity drain your wort though assembly to oxygenate your wort on the way to the fermentor. Made of Stainless Steel. Use with an oxygen tank/regulator to aerate your wort.
Camlock Type D - 3/4"

Camlock Type D - 3/4"
$5.19
Features 304 Stainless Steel Description 3/4" Female Pipe Thread to Female Quick Disconnect Camlock Fitting (Also know as Snaplock or Cam and Groove Fittings)

Short Flare Nut - 1/2", Brass
$1.29
1/2" short flare nut with standard 45 degree flare. Made of Brass.

Weldless Bulkhead, Stainless Steel
$12.49
Features Heavy duty construction 1/2" Male NPT threads 1/2" NPT locknut Silicone O-rings No welding required Description With this high quality stainless steel weldless bulkhead it is easy to add a valve, thermometer, or other accessory to your brew kettle or cooler. Requires a 7/8" hole.

Nylon Flare Washer - 1/2"
$0.49
Features 1/2" flare connection Made of nylon Translucent color (white) DescriptionUse a flare washer in your flare fitting assemblies to ensure a leak free seal. Used for both gas and liquid connections.
Keg Beer Tap (Coupler) Elbow

Keg Beer Tap (Coupler) Elbow
$7.99
If you have a tight clearance issue, the 90 degree coupler elbow will help prevent a kinked line. Can also be screwed on the back of a shank or jockey box to reduce clearances. Comes with one neoprene beer nut washer.

Fixed Faucet Cleaning Attachment with 5/16" Barb
$7.99
Features Nickel plated brass construction 5/16" Hose barb Includes faucet washer DescriptionThis attachment allows you to connect a beer hose to the faucet side of a shank, allowing you to run cleaner through your beer lines and sanitize them thoroughly. Simply remove your beer faucet, attach this fitting in it's place, then pump ...

Diffusion / Aeration/ Carbonating Stone with 1/4" Hose Barb - 2 Micron Stainless
$13.99
Diffusion / Carbonating Stone with 1/4" Hose Barb - 2 Micron. Made of Stainless Steel. Use with on oxygen tank to aerate your wort or with CO2 to carbonate your beer faster.

Diffusion / Aeration/ Carbonating Stone with 1/4" Hose Barb - .5 Micron Stainless
$8.99
Diffusion / Carbonating Stone with 1/4" Hose Barb - .5 Micron. Made of Stainless Steel. Use with on oxygen tank to aerate your wort or with CO2 to carbonate your beer faster.

Diffusion / Aeration/ Carbonating Stone 1/4" Flare Thread - 2 Micron Stainless
$12.99
Diffusion / Carbonating Stone with 1/4" Flare Thread - 2 Micron. Made of 316 Stainless Steel. Use with an oxygen tank or air pump to aerate your wort or with co2 to carbonate your beer faster. Don't forget to get a flare barb and flare washer to connect the stone your tubing.